Ratchet belt sizes by brand
Page content
Short answer: for a waist over 50 in, the ratchet belts that state a fit in inches are Buckley (size chart to 56 in), Mission Belt's Custom strap (up to 56 in) and Kore Essentials XL (44 to 54 in). Anson fits up to 50 in, SlideBelts up to 48 in and Nexbelt's Classic Ebony up to 45 in. Most of these are one size and cut once at home; Mission (small to large) and Kore come in sized versions. Every figure below was read on that brand's own website on 21 November 2026.
We sell the Ardenne Exact-Fit Ratchet Belt, one of the belts listed.
Ratchet belt sizes by brand
| Brand | How it is sized | Strap length before cutting | Largest waist the brand states | Strap width |
|---|---|---|---|---|
| Buckley | One size, cut to fit | 59 in (150 cm) | Size chart to 56 in; 57 in and over: "Contact Us" | Not stated |
| Mission Belt | Small, Medium, Large, or Custom to trim | Not stated | Custom: "Up to 56""; Large: "Up to 38"" | 1.25 in strap, 35 mm buckle |
| Kore Essentials | Regular or XL | Not stated | Regular 24 to 44 in; XL 44 to 54 in | 1.37 in |
| Anson | One size, cut to fit | 56 in | "up to a 50" waist" | 35 mm (1.38 in) |
| SlideBelts (Black Belt) | One size, cut to fit | Not stated | "Fits up to 48" Waist" | 1.25 in |
| Nexbelt (Classic Ebony) | One size, cut to fit | Not stated | "Fits up to 45" waist" | 1 3/8 in |
| Clipton | One size, cut to fit | Black and Brown 59 in (150 cm); Navy and Tan 51 in (130 cm) | Stated as clothing sizes: Black and Brown "up to 5XL", Navy and Tan "up to 3XL" | 3.5 cm (1.4 in) |
| Quince (nylon webbing) | Sized, no cutting | Not applicable | Largest size 38 to 42 in | Not stated |
| Ardenne (ours) | One size, cut to fit | 59 in (150 cm) | Not yet stated: we will publish a measured largest waist. Over 50 in, email us before you order. | 1 3/8 in (3.5 cm) |
Sources, all read 21 November 2026: us.buckleybelts.com product page; missionbelt.com product page; koreessentials.com product page; ansonbelt.com product page and FAQ; slidebelts.com product page; nexbelt.com Classic Ebony product page; cliptonbelts.com product page; quince.com Axel belt page.
Waist size or pants size?
Most brands do not say whether their waist figure means your body or your pants label. The safe way is to measure with a tape around your pants, where you wear the belt, and compare that number with the brand's largest waist.
One size or sized?
A one-size ratchet belt comes long and you cut it once at the buckle end. It fits up to the brand's stated limit, but most brands only take it back uncut. A sized belt needs no cutting, but you have to pick the right size first. Ardenne gives a full refund within 30 days whether you have cut it or not, with nothing to send back, and one free replacement if you cut it too short. See ratchet belt return policies compared for every brand's rule on cut belts.
FAQ
Which ratchet belt fits a 54 in waist?
From the brands' own figures: Buckley (chart to 56 in), Mission's Custom strap (up to 56 in) and Kore XL (44 to 54 in). Anson stops at 50 in and SlideBelts at 48 in.
How long is the Ardenne strap?
59 in (150 cm) before cutting, 1 3/8 in (3.5 cm) wide. If your waist is over 50 in, email support@ardennebelts.com before you order and we will tell you honestly whether it suits you.
How do I cut a ratchet belt to size?
Mark the strap at the front of your waist, add 1 in (2.5 cm) on the buckle side and cut straight across. Step by step: how to size a ratchet belt.
Last checked: 21 November 2026.